Ident System AB – Our RFID tags

Ident System carries a range of specialized and standard RFID tags on stock, or in some cases as made to order to adapt to our customer’s system. We will present a few of our most common tags here, but you might want to contact us to find the tag best suited for your specific needs.
When you want positional data for a forklift in the loading dock or factory floor to ensure that the load is taken to and from the right place, use our floor tag. The floor tag is part of a 125 kHz LF system and designed to be embedded in the floor – out of the way. All that is needed is to drill a small hole, drop in the tag, and refill the hole. Tag dimensions are 105 x 16 (diameter) mmWe typically install our Ideal125 LF reader in the forklift, connected to its terminal wich forwards the positional data to the WMS, etc. The antenna is mounted under the forklift.
For the packaging industry that manufactures for food and beverages companies, we have a UHF wet inlay tag suited for mounting inside the carton rolls.
We also have an LF 134.2 kHz tag especially developed for ID of Tambours in the paper industry. This tag is especially developed to handle the high demands of ruggedness and good readability when placed against a metal surface.
For tracking of tool (drills, milling machines etc) auto-selection and wear, we have a miniature glass tag working at 125 kHz. This is placed inside a milled slot in the tool and is ideally read by our handherld reader USB125 or similar.
For customers that still use the pc3103/xx (OIS-P) tags from Identec solution (Baumer) wich production were closed down in 2018, we offer customers a refurbishment program that makes the tags as new.The refurbishment program includes:
– exchange of battery = prolonged lifetime
– test of tags functions
– test of micro wave functions.
– The program is based on a minimum tag volume of 20 pc per batch or more.We can also offer a wide range of cable ties with LF/HF/UHF tags from HellermannTyton.