Normally your 134,2 kHz LF-antenna would be tuned at the factory, but after installation at the new facility fine tuning might need to be done to optimise the performance. Normally this fine tuning is done by adjusting the capacitor values on the Antenna tuning board and to facilitate this we are now introducing our Antenna Tuning Control (ATC134).

By connecting the ATC134 to a simple volt meter or oscilloscope you can easily find the resonance frequency and optimum capacitor values for your specific installation.If your system is not tunable, we recommend the use of our own Antenna Tuning Unit, with or without Tuning Indicator.

Contact us for more information.

Many of the requests we get from customers is about upgrading and exchanging older PREMID systems, either to improve performance or to replace systems failing by age.

The main work in these projects are often to facilitate communication between main systems set up for communication with older devices protocol, in our case often the Baumer Ident ZIOX16 system.

IdentSystem ABs new ZIOX Host Controller (ZIOX-HC) was developed just to simplify these projects – by both acting as a polling device for the new system and also converting the host protocol and message to Ziox16, which means that customers can connect the new IDEAL134,2 system more or less directly in existing environment.

Ident Systems Swedish website where we offer DOBOT robotic arms for our Nordic customers have now been expanded to contain a selection of our Barcode and RFID readers as well as RFID antennas.

The webshop was expanded as an easy way for our customers to order for direct delivery smaller volumes for testing and experimental purposes.
The customer that want to see our larger product assortment can visit www.identsystem.com, our international website in three languages and contact us from there for more information or orders.

Ident System AB will during the fourth quarter launch a new version of EVS138 barcode scanner aimed at Small and Medium-sized Enterprises for either fixed or mobile mounting such as forklift for pallet handling.  The scanner is operated by means of a joystick, which in turn, works a read head mounted on a movable unit. The handler then controls the camera that reads the codes accordingly.

The new EVS138 will read all common barcodes and 2D codes. It is based on latest matrix technology and can withstand the tough industrial environments of forklift truck applications, including the shock and vibration stresses. The EVS138 read-head has autofocus capabilities allowing it to read codes between 0,2 m up to 13 m. The technology used in the EVS138 provides extremely good reading capabilities. It has built-in error correction.

Features:

• Long reading distance (0,2 m up to 13 m depending on code density)
• Large depth of sharpness range
• Reads Bar code and 2D codes
• Built-in laser pointer for aiming
• Omni-directional reading
• No external lamp needed

The new EVS138 is currently in final development but read more about the EVS138 series on our product page.

Ident System AB EVS144 Imager is a code scanner developed especially for forklift mounting. The scanner is operated by the forklift driver by means of a joystick, which in turn, works a read head mounted on a movable unit. The driver then controls the camera that reads the codes accordingly. The System is easy to install because of its small dimensions.

EVS144 imager reads barcodes and 2-dimensional codes (2D) it has a reading distance between 0,2 m up to more than 13 m.

Imager series is based on the latest matrix technology and is designed to handle a tough industrial environment. Readers are equipped with auto-focus system and have built-in error correction.

Ident System EVS138 Imager is a barcode scanner for either fixed or mobile mounting such as forklift for pallet handling.

EVS138 imager will read all common barcodes and 2D codes. It is based on latest matrix technology and can withstand

the tough industrial environments of forklift truck applications, including the shock and vibration stresses. The EVS138 imager read-head has autofocus capabilities allowing it to read codes between 0,2 m up to 13 m. The technology used in the EVS138 imager provides extremely good reading capabilities. It has built-in error correction.

Features:

• Long reading distance (0,2 m up to 13 m depending on code density)
• Large depth of sharpness range
• Reads Bar code and 2D codes
• Built-in laser pointer for aiming
• Omni-directional reading
• No external lamp needed

Read more of the EVS138 series on our product page.

Ident System AB EVS144 line camera is a code scanner developed especially for forklift mounting. The scanner is operated by the forklift driver by means of a joystick, which in turn, works a read head mounted on a movable unit. The driver then controls the camera that reads the codes accordingly. The System is easy to install because of its small dimensions.

EVS144 imager reads barcodes and 2-dimensional codes (2D) it has a reading distance between 0,2 m up to more than 13 m.

Imager series is based on the latest matrix technology and is designed to handle a tough industrial environment. Readers are equipped with auto-focus system and have built-in error correction.

The team at Ident System AB is not only experienced in the construction of RFID- and barcode readers, we also have long experience in various industrial applications where our unique knowledge of the demands placed on the product and equipment benefits the customer.

That means that apart from our ongoing support and service commitments, we also can offer our customers support, advice and planning as part of the implementation process if needed. We can advise you on what products are most suitable for your project, and how to best implement it into your new or existing system. For more information contact us through our web or email below.

For an example of a specialized solution, lead out previous newsletter about RFID for presicion drilling in the Airline industry, or RFID-based Tambour-ID in the paper industry.