There are many reasons to use a forklift-mounted code reader. First, ergonomics and the working environment becomes better with a reader mounted on the lift. In all situations of cargo handling, it is important to reduce the handling as far as possible in order to minimise damage to the cargo, and if you ensure correct handling the number of errors are reduced and both customer and supplier can save money. Error in the warehouse can also be minimised at the same time as the risk of sending the wrong product to the customer is less.
If you also combine the EVS144 reader with a positioning system (by RFID), you can have almost 100% control over warehouse transfers and transactions. By always doing the right thing, the environmental impact is also lessened.

• 

• 

Summary of the benefits of EVS144:

• Improved working environment/ergonomics
• Minimised handling of cargo
• Less damage on the cargo
• Less or no stock handling errors
• Fewer erroneous deliveries
• Reduced environmental impact

IdentSystem 500E LF reader is a compact, easy to use LF reader capable of reading both 125 kHz and 132.5 kHz tags. 500E is ideal for tracking items on conveyor belts, pallet conveyors as well as CNC machinery. 
Configuration of the unit is done through a user-friendly web interface from your browser and configuration through a serial terminal is also available. 
To further simplify usage, the reader uses our standard (and custom RFID LF-antennas). Note that there are some limitations to the size of antennas that can be used.

• 125 and 134,2 kHz operating frequency 
• Read-Only + Read/Write 
• Ethernet connection to PC for communication and data transfer 
• Configuration by web interface or serial terminal connection 
• Wide range of antennas is available. 
• Reading distance depending on tag, antenna and environment
• Support the following tags:
  125kHz: HITAG1, HITAG2, HITAG3, Q5, EM4x02, EM4x05 (ISO FDX B), EM4x50, TI-RFID.
  134.2kHz: 64bit R/O (8 bytes R/O), 64bit R/W (8 bytes R/W), 1088 bit multipage (117×8 byte R/W)

IdentSystem’s Ideal134 RFID reader is not installed in nice papermills Tambour-ID system all over the world.

Our solution makes system design very flexible since we can design both the tags for different tambour sizes and types of metal surroundings as well as tailor-make antenna sizes and shapes depending on positionening needs. Antannas can also be fine-tuned for optimal readability, even in difficult environments.

The system can both replace the Baumer Ident OIS-P and is ideal for new installations. Ideal134 give the user full traceability back to master systems such as MES and similar and is invaluable for operators to avoid errors in handling and to trace production and quality data.

The IDeal134 reader connects to the present Mill Executive System and will keep track of Tambour-ID, orientation and acceptable destinations. The Tambour-ID system easily integrates with various MES e.g. Honeywell Optivision, ABB Automation, Paperline and similar systems.

We have put together a short system description of our Tambour-ID solution that can be downloaded from our website here: Link to Tambour-ID pdf.

For contact or questions, please e mail contact@identsystem.com, or visit www.identsystem.com. Nordic customers can purchase a selection of our industrial readers direct form our webshop at www.identsystem.se

We will release a new read head EVS144NG in our range of EVS barcode scanners. The EVS144NG will be equipped with a state of the art camera module and have much higher performance than our previous models.

Features for the EVS144NG read head.

• Reading distance about 40% better compared to existing matrix camera
• Faster code reading
• Better auto-focus function with less moving parts
• Less sensitive to sun-light when working outdoor
• Prepared for -30 degrees in freeze houses or cold area
• IP67

The camera unit is compatible with our previous range of EVS144 Line and EVS144 Matrix for upgrade.

Ident System AB EVS144 code readers are a code reader series that is easy to install because of its small dimensions. While both EVS144 models are made for rough outdoor use, the EVS144 Imager excels in strong daylight situations, even where direct sunlight is present. The EVS144 Line Camera on the other hand is made for high reliability in low light environments and can if needed be equipped with an external spotlight. The EVS144 line is also available in a version adapted for freezing environments, down to minus 30 degrees Celsius such as frozen warehouses and harsh outdoor temperatures. If needed, we can also adapt existing units for cold temperature use. Both models have a joystick-controlled movable read-head which makes them suited for both fixed mounting such as entrance areas or conveyor belts, or forklift mounted. The long reading distances, up to 6 m for the line camera and 13 m for the matrix depending on code size, as well as large depth of sharpness and ability to read a wide range of codes as well as inverted codes, codes punched in metal sheets or low quality printed codes makes this a truly versatile series for use in harsh environments where reading conditions and/or a large flexibility to read a range of code types and object sizes are present.

We have been talking quite a bit about our tailor-made LF-RFID antennas here in the newsletter, and we thought that some of you might be interested to see how they now are manufactured. Click on the link, or on the picture below for a short video. Link to Video.

Do you need a custom-made antenna that covers a wide area, or maybe a very small one to fit in a specific spot? Maybe shaped as a rectangle, square, or a circle or to be fitted and screwed in place like a bolt

We can help you with most requests and adapt our antennas to your needs. We can do this for both our own IDeal125 and IDeal134 (TambourID) systems and the Baumer OIS-L readers. Contact us for more details.

Starting this summer, IdentSystem will add DH Robotics PGE-5 grippers for robotic arms to our webshop.
The PGE-5 gripper is recommended by DOBOT for use with the latest robotic arm MG400 and is the ideal companion for MG400 in many use cases:

• Pick and place
• Machine tending
• Assembly
• Experimental teaching

Some points about DH Robotics PGE-5

• Precise force control​
• Space-saving mounting​
• Everything integrated inside​
• Mounting holes on 4 sides
• Gripping feedback & drop detection​
• Quick response

IdentSystem USB125 is a small, portable USB LF reader. It is the ideal tool to read and write our TambourID tags while still mounted on the tambour, no need to remove the tag in order to change its ID.

​USB125 supports the following chips: EM4x02, EM4x50, EM4x05, HITAG1, HITAG2, HITAGS, Q5, TI-RFID which can be found in a variety of tag types, glass tags, Cable tie tags like HellermannTyton, regular disc tags etc.

Contact us for more information about USB125 and tags.

For LF 125 and 134,5 kHz systems, IdentSystem offer our customers the option of having antennas tailor-made for their applications.

We can help you with most requests and adapt our antyennas to your needs. We can do this for both our own IDeal125 and IDeal134 (TambourID) systems and the Baumer OIS-L readers. Contact us for more details.